They will after

Room-scale DnD dungeons anyone?

It looks like there are multiple layers printed without feeding filament, which causes these frays to build up. Could it be that the filament clogs after this layer? Or do you see that filament still properly feeds later? This could happen for example due to heat creep and the filament getting too warm/soft in the extruder to properly feed or you trying to feed too fast.

Yes I know. We do simulations but we only measure who reports them and provide training how to report them (In the mail itself). No shaming for user who click them and no additional training on how to look at details.

It makes no sense training the user in looking at for example the links if all the big vendors use suspicious links anyway. For example the phishers use OneNote shares to phish, but those are hosted on Microsoft which by itself is legitimate. The only way a user really is able to recognize a phish is if it is unsolicited (report the mail as spam) or if it looks legit but asks for credentials (report it, we use SSO everywhere possible and you should never be asked for credentials for one of our platforms). We cannot do this for all vendors however and the users are encouraged and trained on using Passkeys or Autofill by the company provided password manager so that they get suspicious when no autofill is possible, then they can report the mail.

It’s not always possible to recognize phishing from the get go and security is better suited to investigate than rando from the logistics department.

Yes but the only relevant metric is how many reported it. Doesn’t matter if they delete, read, click or enter data. We’re only interested in the information that a phish got through our security controls (=we failed our users), so we can investigate (and clean up if needed) the impacted mailboxes and accounts.

The layoffs are finally paying off…

deleted by creator

However I can see when any IPv6 begins with 2a02:12xx:: then it’s Swisscom (biggest swiss ISP). But I can’t remember any of their hundreds of IPv4 prefixes.

You might be able to make it much stiffer by adding more of the arms parallel. The force should be consistent when you tighten multiple of them with one screw.

You have to choose the one without AMS color changer: https://us.store.bambulab.com/products/a1-mini?variant=41513493627016 It should be 199$

Bambu A1 Mini is on sale. Add a 0.2mm Nozzle and you have a perfect machine for miniatures

ExtensibleMarkupLanguageHypertextTransferProtocolRequest

You should ask the creator. Maybe he’s unaware that people can’t post makes anymore or it’s a setting they can change.

This makes only sense, given that they have a dedicated investors.broadcom.com page but no security.broadcom.com you can see where their focus is.

Make the movements visible in preview. Most probably it makes the total movement shorter when switching between parts.

For services I host I really like this EULA:

If the Provider of the Service (the “Provider”) needs a place to crash and you have a sofa available, you should maybe give the Provider a break and let him sleep on your couch.

If you are caught in a dire situation wherein you only have enough time to save one person out of a group, and the Provider is a member of that group, you must save the Provider.

THE ACCESS IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO BLAH BLAH BLAH ISN’T IT FUNNY HOW UPPER-CASE MAKES IT SOUND LIKE THE LICENSE IS ANGRY AND SHOUTING AT YOU.

Edit: original found here: https://github.com/pirate/security-growler

I would recommemd setting up greylog. It’s pipelines are really mighty and not that hard to learn. You can run it in a VM.

If you really want to you can run filebeat on windows with a file output, so it will write everything in json format to a file. However you will still have to parse ot, make it searchable etc.

Lower speed between the holes because of low acceleration. Because of this more heat is brought into the layer which makes it more shiny. Your nozzle doesn’t reach the same speed on a 20mm line as it does on a 200mm line.

The root cause has been fixed in 2.2.2: https://www.phoronix.com/news/OpenZFS-2.2.2-Released Block cloning has not yet been reenabled as default though.

Is it only me or does that CoreXZ kinematic not make any sense? They gain the ability to move in Z in high speed but add ringing etc. in Z direction.