Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
I doubt these will take off. They do look cool Af while shifting imo
Wet lubes are notorious for attracting grime. Lube up, let rest overnight, wipe off excess day after and that grime still builds up quickly. And since the grime is stuck in the lube just washing it off isn’t enough. Requires a good cleaning and then new lube.
Wax is a great option but all wax solutions I’ve encountered requires a very clean drivetrail. No oils, lubes, grease etc or the wax won’t stick. More prep work but so worth it in the end.
I would love to go belt drive and there are high end internal hubs that offers similar range to 12spd mtb gears. Tech is there, tech is working but cost is still too high for me. More likely I’ll go belt drive when (if) I get me a touring/bike packing bike.
That said this mechanical solution looks too engineered to get wide adaptation. 2-3spd gear hubs are tried and tested. That said again this combined with a moderatley priced 6-8spd hub could be cool. Cool in a frankenbike kind of way.
Yep. I switched to a perifin dip and I’m never going back. I alternate between 2 chains so that I always have a fresh one ready to throw on. It’s just so much easier and more clean than dealing with traditional lube. The only issue I even have is when I take it to a bike shop and they decide to lube it without asking first.
When I got my new road/gravel bike several weeks ago, I vowed to keep my components lasting as long as possible. So, I entered the world of immersion wax. Within a few days, I converted my other two bikes to waxed chains + drip wax every 200-250km (with another full immersion at 1000km).
The silence, cleanliness, efficiency, and known low-friction/low-wear makes it sooooo worth it. I find the process and ongoing upkeep to be far, far easier than when I was using a high-quality oil-based lube (Silca Synergetic).
I just invested in a bunch of Wippermann chains and master links to make the process even easier. I really can’t see myself ever going back to traditional lube.
When I switched to wax on my mtb, my dirty chain problem/shifting issues disappeared… And I ride in a swampy area, just can’t get worse conditions - water, silt, mud, clay, dirt, sand, dried up leaves/plants, etc.
Wet lubes are notorious for attracting grime. Lube up, let rest overnight, wipe off excess day after and that grime still builds up quickly. And since the grime is stuck in the lube just washing it off isn’t enough. Requires a good cleaning and then new lube.
Wax is a great option but all wax solutions I’ve encountered requires a very clean drivetrail. No oils, lubes, grease etc or the wax won’t stick. More prep work but so worth it in the end.
I would love to go belt drive and there are high end internal hubs that offers similar range to 12spd mtb gears. Tech is there, tech is working but cost is still too high for me. More likely I’ll go belt drive when (if) I get me a touring/bike packing bike.
That said this mechanical solution looks too engineered to get wide adaptation. 2-3spd gear hubs are tried and tested. That said again this combined with a moderatley priced 6-8spd hub could be cool. Cool in a frankenbike kind of way.
Still. Cool tech demo/proof of concept.
Yep. I switched to a perifin dip and I’m never going back. I alternate between 2 chains so that I always have a fresh one ready to throw on. It’s just so much easier and more clean than dealing with traditional lube. The only issue I even have is when I take it to a bike shop and they decide to lube it without asking first.
When I got my new road/gravel bike several weeks ago, I vowed to keep my components lasting as long as possible. So, I entered the world of immersion wax. Within a few days, I converted my other two bikes to waxed chains + drip wax every 200-250km (with another full immersion at 1000km).
The silence, cleanliness, efficiency, and known low-friction/low-wear makes it sooooo worth it. I find the process and ongoing upkeep to be far, far easier than when I was using a high-quality oil-based lube (Silca Synergetic).
I just invested in a bunch of Wippermann chains and master links to make the process even easier. I really can’t see myself ever going back to traditional lube.
When I switched to wax on my mtb, my dirty chain problem/shifting issues disappeared… And I ride in a swampy area, just can’t get worse conditions - water, silt, mud, clay, dirt, sand, dried up leaves/plants, etc.
Yea, internal makes more sense for a bike.
This design probably has more application for industrial/manufacturing environments.