From the article:

The man is blaming the automaker even though the manual door opener was under his left hand the whole time.

A man in Arizona says that he was recently trapped in his Tesla after getting in, closing the door, and then realizing that his battery was dead. What he didn’t know is that the manual release for the door was under his left hand the whole time. Now, he’s blaming the automaker and raising awareness.

Rick Meggison, 73, says that Tesla needs to address what he calls a “safety concern” involving how to exit the car when the battery dies. The main door latch actuator on all Tesla models is electronic so if the 12-volt battery dies it won’t work. To ensure safe exit of the vehicle Tesla includes a manual release. Meggison didn’t know about that and ended up trapped in his car for 20 minutes on a hot day.

“I couldn’t open the doors. I couldn’t lower the windows. The computer was dead, so I couldn’t open the glove box. I couldn’t open anything,” he told ABC7. Of course, he could’ve opened the door in about two seconds had he known that the manual release was just ahead of his window switches. His situation has many wondering who’s to blame in situations like this.

  • Kushan@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    arrow-down
    1
    ·
    1 year ago

    On the outside, the door handles of a Tesla automatically recess when not in use, which reduces drag on the car and let’s it drive more efficiently (therefore giving you more range).

    Tesla does a lot of “reinventing for the sake of it” but in this one instance there is actually a reason for it.

    • chunkystyles@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      The door handle in question is on the inside of the car. It doesn’t serve any engineering reason to be resigned other than for aesthetics.

    • CurseBunny [she/her]@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Wikipedia article concerning drag coefficients

      The drag coefficients of even the more recent Teslas are comparable to other vehicles that don’t use retracting door handles, even the GM EV1 from 1999 beats all the Teslas on the table in terms of drag reduction. The door handles may technically be a contributing factor towards their more favorable position on the list, but they’re certainly not necessary and don’t seem to be highly impactful. A large part of Tesla design philosophy and marketing is making their cars seem futuristic and highly advanced through things like motorized door handles and autopilot. Their primary goal is to provide a unique and pleasant user experience “out of the box” and their justification for things like the door handles retracting are almost certainly retroactive.

    • wahming@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Genuinely curious, how much savings does that accomplish? Something as small as a door handle doesn’t seem like it would create a lot of drag, but it might just be unintuitive

      • madcaesar@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        It’s bullshit. They’d save 1000x more in range if they fixed the shitty gaps in their paneling instead of doing away with door handles.

        Just because it’s new doesn’t mean it’s better. Reinventing door handles is something no car needs.

      • Mamertine@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I seriously doubt it changes much.

        Hypermiling is a thing where people try to get 100 mpg from a compact car like the Honda Civic. It’s been around for a few decades now.

        There are things you can do to improve aerodynamic abilities of the car. The biggest is the wheel shrouds and overall car shape (nose and tail). Then you’re covering up seams in the body work. I’ve not heard of anyone swapping out or door handles.

        I’m sure the cause drag, but there is so much lower hanging fruit to address before changing something that small.

      • Kushan@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        arrow-down
        2
        ·
        1 year ago

        I honestly don’t know, there does seem to be some controversy around this but Tesla seems determined to want flush handles so there must be something to it.

          • Kushan@lemmy.world
            link
            fedilink
            English
            arrow-up
            0
            arrow-down
            2
            ·
            1 year ago

            It’s definitely not just aesthetics, but the impact is up for debate. Tesla aren’t the only EV manufacturer doing it.

            • wahming@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              If there is no data, how do you know it ISN’T just for aesthetics? It certainly seems that way.

              • Kushan@lemmy.world
                link
                fedilink
                English
                arrow-up
                0
                arrow-down
                2
                ·
                1 year ago

                Well, I did some googling and found this:

                According to Amey Vikram, a lead analyst at Technavio for automotive components research, “The retractable door handle design allows radical aerodynamic designing for the side body panel. Retractable door handles are invisible handles that contribute by about 12% to reduce the drag coefficient of vehicles. Retractable door handles eliminate the issue of airflow bulge creation, air flow turbulence generation, and air flow pressure conservation. The decreased drag coefficient will also contribute to increasing the fuel efficiency of vehicles as there will be low drag generation resisting the movement of vehicles through the airflow.”

                Source: https://www.businesswire.com/news/home/20180105005468/en/Top-3-Drivers-of-the-Global-Automotive-Retractable-Door-Handle-System-Market-Technavio

                Seems like there is indeed plenty of data.

            • themeatbridge@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              The impact on drag at normal highway speeds is negligible, there is no debate. It is entirely for cool factor points. Nothing accomplished by retractable handles couldn’t be done better, cheaper, and with fewer moving parts with a standard handle.

              • Kushan@lemmy.world
                link
                fedilink
                English
                arrow-up
                0
                arrow-down
                2
                ·
                1 year ago

                errr, yeah there is debate. Given that nearly every EV manufacturer is doing their darnedest to flatten or remove door handles, don’t you think there must be more than a “negligible” impact?

                https://www.businesswire.com/news/home/20180105005468/en/Top-3-Drivers-of-the-Global-Automotive-Retractable-Door-Handle-System-Market-Technavio

                According to Amey Vikram, a lead analyst at Technavio for automotive components research, “The retractable door handle design allows radical aerodynamic designing for the side body panel. Retractable door handles are invisible handles that contribute by about 12% to reduce the drag coefficient of vehicles. Retractable door handles eliminate the issue of airflow bulge creation, air flow turbulence generation, and air flow pressure conservation. The decreased drag coefficient will also contribute to increasing the fuel efficiency of vehicles as there will be low drag generation resisting the movement of vehicles through the airflow.”