Can I 3d print something like the g602 mouse? I can solder components together and do a little programming if need be but designing something like that is way over my head. Not being able to find a replacement for that thing is killing me.
My main complaint is that the Statial B only has 2 thumb buttons, and I’d prefer to have at least 4. I’ve considered modifying the design of the relevant plate, but there’s still the issue of not having ports to wire the switches to the raspberry pi it runs on.
I also have a ploopy mouse like the other commenter mentioned. It’s definitely not a replacement for a G602 (that’s also the mouse I used before switching to open source), but it gets the job done. I just need to buck up and finish assembling the Statial B
It looks like you can buy a fully assembled mouse, a build it yourself kit, or do it from scratch with the schematics. Doesn’t come with quite as many side buttons though
If it helps, you can 3D print your own hardware nowadays
Can I 3d print something like the g602 mouse? I can solder components together and do a little programming if need be but designing something like that is way over my head. Not being able to find a replacement for that thing is killing me.
Try the Statial B. You can adjust it to meet almost any shape you need.
Note, it can be printed with an FDM, but it’ll need a 0.2mm nozzle and really good tuning. Some of the parts were a pain to print for me
https://github.com/PyottDesign/Statial-b
My main complaint is that the Statial B only has 2 thumb buttons, and I’d prefer to have at least 4. I’ve considered modifying the design of the relevant plate, but there’s still the issue of not having ports to wire the switches to the raspberry pi it runs on.
I also have a ploopy mouse like the other commenter mentioned. It’s definitely not a replacement for a G602 (that’s also the mouse I used before switching to open source), but it gets the job done. I just need to buck up and finish assembling the Statial B
That is really cool. I think there’s ways to get more switches on one port on Arduino but I don’t remember for sure.
I have no personal experience with it, but you might be interested in this completely open source mouse:
https://ploopy.co/mouse/
https://github.com/ploopyco/mouse
It looks like you can buy a fully assembled mouse, a build it yourself kit, or do it from scratch with the schematics. Doesn’t come with quite as many side buttons though
Interesting. It’s a start at least.
I need a new one of those little dongles, where can I find the STL?